New Upgrade Function
1. 3 clicks to reconnect the drive (no need to disconnect the cable)
2. 5 clicks to turn on write protection (exit requires unplugging the cable again)
3. Multi-color LEDs
JEYI i9X Display Visual Dual M.2 Protocol SSD Enclosure
JEYI i9X display visual Dual M.2 protocol SSD enclosure
Built-in RTL9210B dual protocol 10G high-speed master control theoretical read/write speed up to 1000M. Support both NVMe protocol and SATA protocol.
Supports TRIM, ASPM, UASP acceleration, and sleep mode
Plug-and-play, allowing data transmission across multiple devices such as desktops, laptops, cell phones, tablets, cameras, etc. at high speed across platforms and scenes
Compact body with good feel Length only 103mm Width only 32.5mm Thickness only 11.5mm
Multi-fin on all sides to support heat dissipation, so that the disk is always running at normal temperature, and always take care of the disk.
JEYI insists on using the high cost superconducting thermal conductivity pad and all-aluminum heat dissipation method to prevent the disk from being "baked" in the enclosure and reducing the life of the disk.
JEYI i9X can read and write for a long time with high intensity, which is suitable for professional-level uninterrupted applications. Can run Win To Go, VmWare virtual machine for a long time, large games, large 8K RAW video editing and other high-intensity professional applications
It Can Also Display
Conncecting USB 2.0 - 5 seconds Orange
Conncecting USB 3.0 5G - 5 seconds Green
Conncecting USB 3.2 10G - 5 seconds Purple
Write-protected - remains in a static blue state
Reading - the light flashes rapidly in succession
Sleep Mode - multi-color breathing light effect
After Safe Ejection - in stand by mode - breathing light effect for "USB 2.0 Orange" "USB3.0 Blue" "USB3.1 Purple"
1G File Transfer in 1 Second
NVMe enclosure adopts USB 3.1 Gen 2 transfer speed up to 10Gbps
NOTE: SATA SSD ONLY SUPPORT 6Gbps (600Mb/s Max)
How to set write protection
Enter write protect: touch the screen 5 times, then re-plug the cable to enter protect mode (red light to long blue)
Exit write protect: touch the screen 5 times, then re-plug the cable exit protect mode (long blue light to red light)
Note: Write protection with memory function, so as long as you don't exit the write protect function, it will remain in protected mode
Reconnect the drive without re-plug cable
JEYI exclusive patent: When you exit the drive, you don't need to unplug the cable, just click the screen 3 times to reconnect the drive.
1 minutes into sleep mode to save energy
If the SSD case goes into sleep mode, you need to do a read action on the drive to exit sleep mode.
Note: Sleep time can be modified by firmware
Efficient Cooling Design
All-aluminum body with multiple grooves to effectively increase the cooling effect
Support Both NVMe and SATA SSD
Supports both M.2 NVMe (M-Key,B&M-Key) and M.2 SATA(B&M-Key)
RTL9210B Dual M.2 Protocols
The RTL9210B-CG is a USB bridge that combines a USB device with both a PCI Express (PCle) controller and a SATA controller
Supports TRIM, ASPM, UASP Acceleration, and Sleep Mode
Full Aluminum Case
Keeps your SSD cool with thermal compound pads
Two Cables Inside (Gift)
1pcs TYPE C To C USB 3.2 Gen2 Cable
1Pcs TYPE A To C USB 3.2 Gen2 Cabl
1pc NVMe/SATA SSD Enclosure
1Pc C to C Cable
1Pc A to C Cable
10Pcs Thernal Pads